Interior material for commercial or office facilities.
Kitchen, Bathroom & Wall Panel Interior.
Exhibition booth, Stage & Sign
Furniture, Interior Decoration
Toy , Educational tool
ForesCOLOR® is a “one of a kind” product. It is not only unique for its look and color, but for its diverse extensive application possibilities.
Although it is essentially a manufactured product, ForesCOLOR® has a textured surface that gives it a very special look and feeling unlike artificially painted surfaces.
Due to ForesCOLOR® being colored consistently all the way through, the panels can be scratched a number of times, but they are easy to repair. All that is required is sanding and re-lacquering and they are back to brand new.
ForesCOLOR® accepts any kind of finishing. By applying a glossy lacquer one can have a modern trendy look, and by applying oil one can create a slightly more conventional look. A mat or waxed look, and fire retardant and textured finishes are all achievable using ForesCOLOR®.
During the planning stage of a project, architects and designers won’t have to worry about hiding the edges. ForesCOLOR® can be fitted without further finishing.
ForesCOLOR® is manufactured from 50-60% recycled raw materials purchased from pallet and furniture manufacturers. ForesCOLOR is FSC certified.
As stated previously, the formaldehyde emissions of ForesCOLOR® are very low and it is considered non toxic according to US requirements since the emissions are below 0.1ppm. Also, ForesCOLOR® avoids the use of paints that often contain formaldehyde as a preservative.
This characteristic is very important since it means that after machining, there is little or no sanding required, thus drastically reducing the cost of labor. This also allows an easier finishing, as fewer coats are required. It is enough to apply one coat of sealer followed by one or two coats of lacquer (although a little extra should be applied to the edges).
The panels have to be lacquered on all edges but ForesCOLOR® may be used for kitchens, bathrooms and flooring. We have some customers using it externally, but it is best suited for interior applications.
ForesCOLOR is at least 30% stronger than standard MDF making it a lot more stable.
No need for expensive and toxic colored lacquering. However we do have customers using paint with ForesCOLOR® because it is much easier and more cost effective. It is easy to assemble as it does not require edging.
Besides the fact that ForesCOLOR® does not require sanding, it should also be noted that ForesCOLOR® has a much lower percentage of sand and metal. It also has a high melamine content that acts as a lubricant for the cutting tools, enabling them to last a lot longer. The use of sub products such as branches, bark and residue from timber mills contributes to the sustained management of the planets forests.
– Small light brown pine chips are visible at random throughout a sheet of ForesCOLOR® board, adding to its unique natural look!
– While variances in color remain within acceptable parameters, according to CIE lab norms allied to data colors software, it is important to note that slight variations may occur. This is due to the natural pine fibers and eco friendly organic dyes that make ForesCOLOR® the innovative product it is!